SCHEDA TECNICA/ TECHNICAL DATASHEET
VALVOLE DI BLOCCO E CONTROLLO DISCESA A DOPPIO
EFFETTO A FLANGIA
DOUBLE OVERCENTRE
VALVES FLANGEABLE
Valvola utilizzata per controllare il movimento e
il blocco dell’attuatore in entrambe le direzioni
realizzando la discesa controllata del carico che
non sfugge trascinato dal proprio peso, in quanto la
valvola non consente alcuna cavitazione dell’attua-
tore. Gli attacchi a angia consentono il montaggio
diretto della valvola sull’attuatore.
SCHEMA IDRAULICO
PERDITE DI CARICO
VBCD 3/8 - 1/2 DE FL
HYDRAULIC DIAGRAM
PRESSURE DROPS CURVE
These valves are used to control actuator’s move-
ments and block in both directions in order to have
a under control descent of a load; load’s weight
doesn’t carry it away, as the valve prevents any cav-
itations of the actuator. Flange ports enable direct
mounting of the valve on the actuator.
USE AND OPERATION:
Collegare V1 e V2 all’alimentazione e angiare
C1 e C2 direttamente sull’attuatore.
• pressione di taratura diversa da quella standard.
• piombatura (CODICE/P) e predisposizione alla piom-
batura (CODICE/PP).
Connect V1 and V2 to the pressure ow and ange
C1 and C2 directly to the actuator.
A RICHIESTA
• other settings available
• sealing cap (CODE/P) and arranged for sealing
cap (CODE/PP)
TIPO / TYPE
VBCD DE FL
Corpo: acciaio zincato
Componenti interni: acciaio temprato termicamente
e retticato
Guarnizioni: BUNA N standard
Tenuta: tralamento trascurabile
Taratura standard: 320 Bar
La taratura della valvola deve essere almeno 1,3
volte superiore alla pressione indotta dal carico per
consentire alla valvola di chiudersi anche quando
sottoposta alla pressione corrispondente al carico
massimo.
Body: zinc-plated steel
Internal parts: hardened and ground steel
Seals: BUNA N standard
Tightness: minor leakage
Standard setting: 320 Bar
Valve setting must be at least 1,3 times more than
load pressure in order to enable the valve to close
even when undergone to maximum load pressure.
Temperatura olio: 50°C - Viscosità olio: 30 cSt
Oil temperature: 50° C - Oil viscosity: 30 cSt
3.6
MATERIALS AND FEATURES:
APPLICATIONS:
MONTAGGIO:
ON REQUEST
MATERIALI E CARATTERISTICHE:
IMPIEGO:
Δ
P (BAR)
FLOW - Q (l/min)
C2 V2
C1 V1
V2 C2
V1 C1
SCHEDA TECNICA/ TECHNICAL DATASHEET
CODICE
CODE
SIGLA
TYPE
RAPP. PILOT
PILOT RATIO
PORTATA MAX
MAX FLOW
Lt. / min
PRESSIONE MAX
MAX PRESSURE
Bar
V0424 VBCD 3/8” DE/FL 1:4,5 40 350
V0434 VBCD 1/2“ DE/FL 1:4,5 60 350
90
3
CODICE
CODE
SIGLA
TYPE
V1 - V2
GAS
C1 - C2
mm
L
mm
L1
mm
L2
mm
H
mm
S
mm
PESO
WEIGHT
kg
V0424 VBCD 3/8” DE/FL G 3/8” Ø9 150 248 110 60 30 2,012
V0434 VBCD 1/2” DE/FL G 1/2” Ø9 150 248 110 60 30 1,980
CODICE/ CODE
B8500
BASETTA PER VALVOLA /
VALVE’S FLANGE: